Maintenance Strategy Of Wooden Crafts For Kids

Update:20-10-2021
Summary: The maintenance strategy of Wooden Crafts For Kids: 1. Wooden handicrafts must be properly concealed. The storage of objects in the cabinet should not exceed the door frame. If it is often squeezed and jammed, the cabinet door will be deformed. The ......

The maintenance strategy of Wooden Crafts For Kids:

1. Wooden handicrafts must be properly concealed. The storage of objects in the cabinet should not exceed the door frame. If it is often squeezed and jammed, the cabinet door will be deformed. The mahogany surface of wooden crafts is generally brittle, such as tabletop and chair surface. Always pay attention to prevent bumps and cracks. If you find that there is a tenon at the stress point during use or moving, it must be re-glued and sealed before use. In order to protect the lacquer film from scratches and show the wood texture on the panel of the wooden crafts, a thick glass plate is generally placed on the table, and a small suction pad is used to separate the glass plate and the wooden table. It is recommended not to use transparent polyethylene crystal plates.

2. Wooden crafts are generally used for a long time, so you should always protect the surface coating of wooden products. It is best to wipe with a little wax every three months to not only increase the beauty of the wooden products but also protect the wood.

3. To keep the wooden crafts tidy, clean gauze can be used to wipe the dust daily. It is not advisable to use chemical brighteners to prevent the paint film from becoming sticky and damaged. In order to maintain the brightness of the wood paint film, the walnuts can be crushed, peeled, and then polished with three layers of gauze.

4. Prevent solvents such as alcohol and banana water from tipping over. Otherwise, "scars" will grow on the surface of wood products. When the surface of wood products is stained with dirt, wash it with mild soap and water. After drying, wax again to restore the original appearance but do not wipe it with solvent liquids such as gasoline, kerosene, turpentine, or it will wipe off The surface paint and the gloss of the lacquer. Walnut oil used to maintain wood products is only suitable for wood products that are not painted and treated with waxing. The frequency of use should not be too high. Generally, it can be used once every 2-3 months. In a relatively dry environment, the maintenance interval can be appropriately shortened, and the maintenance should be carried out once a month. But be sure to pay attention to the dosage in normal use. Oil has the characteristics of dust absorption, too much use will cause dust to adhere, resulting in a greasy feeling.